7100 4T 10W-40 High Performance Motorcycle Lubricant 100% Synthetic - Ester

TYPE OF USE High performance bikes,

sports bikes, street & road bikes, trails, off road bikes, enduro, trial…fitted with 4 stroke engines, integrated gearbox or not, wet or dry clutch, engines meeting Euro 2, 3, 4 or 5 emission regulation, fitted with exhaust gas after treatment systems: catalytic converters, air injection into exhaust pipe... Suitable for specific SUZUKI, YAMAHA, KAWASAKI engines requiring SAE 10W-40 viscosity grade oil. Other uses: street bikes without catalytic converters, scooters, ATV’s, UTV’s…

PERFORMANCE STANDARDS:  API SN / SM / SL / SJ / SH / SG SPECIFICATIONS JASO MA2 under N° M033MOT161

Protection Ester Technology: - Low traction coefficient Ester to minimize engine internal friction losses and improve performance - Synergy of Ester with anti-wear additives and improved shear resistance for improved gear protection and life time. 100% Synthetic lubricant for improved oil film resistance at high temperatures and high revs. Optimized Phosphorus and Sulfur content (JASO MA2 < 1200 ppm) for better operating conditions of catalytic converters. The innovative anti-wear additives package provides outstanding gearbox protection. FZG Gear Test results: Pass FLS>14. The FZG (Forschungsstelle für Zahnrader und Getriebebau) Test, evaluates fluid lubricating and wear protection properties at the interface of a loaded set of gears. Lubricants are then graded based on their “Failure Load Stage” or FLS rating from FLS 1 (very poor result) up to FLS 14 (outstanding result).

Comfort 

JASO has created its own 4-stroke motorcycle standard -JASO T903- which has three grades MA, MA1 and MA2. JASO MA2 offers the most efficient friction levels to guarantee the clutch engagement during the three riding modes: Starting, Acceleration and Constant Speed.

RECOMMENDATIONS Drain interval: according to manufacturers’ recommendations and tune to your own use. Can be mixed with synthetic or mineral lubricants.

PROPERTIES

Color Visual Red Viscosity grade SAE J 300 10W-40 Density at 20°C (68°F) ASTM D1298 0.859 Viscosity at 40°C (104°F) ASTM D445 88.8 mm²/s Viscosity at 100°C (212°F) ASTM D445 13.5 mm²/s Viscosity Index ASTM D2270 154 Pour point ASTM D97 -33°C / -27°F Flash point ASTM D92 236°C / 457°F TBN ASTM D 2896 8.4 mg KOH/g